The DireWolf Deadlift Bar (20kg, 27mm, 2330mm) Black – Remastered
Original price was: AED 1,214.AED 850Current price is: AED 850.
SKU: 0064
Why have a dedicated Deadlift bar?
For deadlift-dedicated athletes who demand serious whip, superior grip, and aggressive knurling to push their 1RMs further – this bar delivers.
The 27 mm shaft diameter, extended 2330 mm length, and wider sleeve spacing are all engineered to enhance whip. This allows the bar to flex more before the plates break contact with the floor, helping lifters initiate the pull from a slightly higher point – potentially moving heavier loads.
And don’t underestimate grip: reducing shaft diameter by just 2 mm (which translates to nearly 6 mm in circumference) makes a massive difference in hand feel and control – especially on max efforts. The aggressive knurl further amplifies your grip confidence during explosive pulls.
A true specialist – the DireWolf is made for deadlift purists, strength enthusiasts, and high-performance facilities that take pulling seriously.
Check our DireWolf Deadlift Bar Red
✅ Free Delivery & Installation Above AED 8,990 (Across UAE)
✅ Cashless Checkout – Stripe & Bank Transfer
✅ 1–2 Day Delivery in Dubai | 2–5 Days UAE-wide
✅ Free Delivery & Installation Above AED 8,990 (Across UAE)
✅ Cashless Checkout – Stripe & Bank Transfer
✅ 1–2 Day Delivery in Dubai | 2–5 Days UAE-wide
In stock
Delivery Timeline: Receive your order 
Chamfered sleeves for smooth loading. Upgraded Aluminium BullrocK end cap seals the bar’s identity with pride.
Equipped with Bushings, engineered for controlled rotation – ideal for heavy lifts like squats, bench press, and deadlifts where minimal spin ensures bar stability. Sleeves permanently welded to the shaft using industrial-grade friction welding-the method trusted by global barbell manufacturers-for unbreakable integrity.
Every shaft undergoes visual inspection for straightness, finish, and knurl precision before entering final assembly. Aggressive 1.5mm knurl gives raw traction for heavy compound lifts. The Black Hard Chrome surface provides a clean, tactile grip feel – trusted by top lifters worldwide. Deep-cut grooves on the sleeves keep your collars gripped tight – no slips, no distractions. Each bar passes brutal bend and tensile strength tests, so you can lift heavy with confidence. Oiled, sealed in anti-rust wrap, capped with rubber, and locked in a 6mm tube – your bar arrives battle-ready.
Precision-etched IPF -4 knurl marks for consistent hand placement and professional lift alignment. Without Center Knurl.
Post heat-treatment, each shaft is precision-ground and polished for uniform diameter and smooth finish. After the knurling, protective surface treatment – Black Hard Chrome – is then applied to safeguard the bar from rust and corrosion. Sleeves are aligned, fitted with bearings or bushings, and tested for smooth spin – nothing leaves without passing BullrocK QC. 3-Year Warranty on Workmanship. Lifetime Warranty Against Bending.
Chamfered Sleeves & Aluminium End Cap. Every Detail Counts.
Sleeve Rotation System: Bearings / Bushings. Spin That Matches Your Lift.
Friction Welded Sleeves. Fused by Industry-Grade Friction Welding.
Assembly Line – Shafts Stage. Built from the Core
2. Knurl Detailing. Grip You Can Trust
Grooved Loadable Sleeves. Hold Strong. Stay Locked.
Bending Strength Test (Load Deflection QC). Stress-Tested. Lifter Approved.
Heavy-Duty Protective Packaging. Armored for Delivery.
Olympic Knurl Markings. Guided by Standards
Improved Shaft Finish. Refined to Perform
Assembly Line – Sleeves Stage. Precision in Every Rotation.
Warranty Promise. Unbreakable by Design
Aluminium End Cap Logo
knurl detailing
powerlifting weightlifting marks
Bushing / Bearing System
Chamfered, Grooved Sleeves
Improved Shaft Finish
Friction Welding
Bending Test
Precision at Every Stage
Assembly Line
A-Grade Packaging
Warranty
Bar Specifications:
| Bar Type | Specialty Barbell |
| Bar Weight | 20kg |
| Shaft Diameter | 27mm |
| Knurl | 1.5mm Volcano |
| Knurl Type | IPF-4 |
| Center Knurl | No |
| Whip | Great |
| Bar Length | 2330mm |
| Loadable Sleeve Length | 400mm |
| Shaft Coating | Black Hard Chrome |
| Sleeve Coating | Hard Chrome |
| Bushing/Bearing | Bronze Bushings |
| Tensile Strength | 190,000 PSI |
| Max load | 1500lbs / 680kg |
Only logged in customers who have purchased this product may leave a review.
Related products
The Hound Bar (20kg,28.5mm) Black Hard Chrome – Remastered
Original price was: AED 985.AED 621Current price is: AED 621.SKU: 0047
In stock
The Hound Bar (20kg,28.5mm) Hard Chrome – Remastered
Original price was: AED 985.AED 621Current price is: AED 621.SKU: 0041
In stock
The Bison Squat Bar (25kg, 32mm, 2400mm) – Remastered
Original price was: AED 1,628.AED 1,140Current price is: AED 1,140.SKU: 0066
In stock
The Black Turtle Bar – (28.5mm, 20kg)
Original price was: AED 1,271.AED 801Current price is: AED 801.SKU: 0053
In stock
The Dark Turtle Bar – Bearing Claws (20kg, 28mm) – Remastered
Original price was: AED 1,128.AED 711Current price is: AED 711.SKU: 0049
In stock
The DireWolf Deadlift Bar – (20kg, 27mm, 2300mm) Red – Remastered
Original price was: AED 1,214.AED 850Current price is: AED 850.SKU: 0065
In stock
The Red Turtle Bar (20kg, 28mm) – Remastered
Original price was: AED 1,171.AED 738Current price is: AED 738.SKU: 0048
In stock
The Sabertooth Bar – Stainless Steel (20kg, 29mm) – Remastered
Original price was: AED 1,600.AED 1,008Current price is: AED 1,008.SKU: 0063
In stock
The Sabertooth Bar (20kg, 29mm) Hard Chrome – Remastered
Original price was: AED 1,157.AED 729Current price is: AED 729.SKU: 0050
In stock
The Short Panther Bar (15kg,28.5mm, 6ft) Black Hard Chrome – Remastered
Original price was: AED 928.AED 585Current price is: AED 585.SKU: 0056
In stock
The Toros Evo Bar (20kg, 29mm) Chrome – Remastered
Original price was: AED 843.AED 531Current price is: AED 531.SKU: 0074
In stock
Reviews
There are no reviews yet.